Convert Pint to Cubic Meter (pt → m³)

Converting pints to cubic meters is straightforward: multiply by the conversion factor. Follow these three steps to do it by hand or in your head.

1. 1
   Take your value in pints

   Start with the number of pints (pt) you want to convert.
2. 2
   Multiply by 0.000473

   The conversion factor from pt to m³ is 0.000473. Multiply your value by this number.
3. 3
   Read the result in cubic meters

   The result is your value in cubic meters (m³).

Multiply the value in pints by 0.000473. For the reverse direction, multiply by 2,113.3764.

• ✓1 US pint = 473 ml; 1 UK imperial pint = 568 ml — a 20% difference.
• ✓UK pint = 20 UK fl oz; US pint = 16 US fl oz.
• ✓When reading a pint figure, always note country context.

• ✗Assuming a US pint equals a UK pint — 20% off.
• ✗Using "pint" in bulk commerce without specification.
• ✗Confusing dry pint (550 ml) with liquid pint (473 ml) in the US.

What is the Pint?

The pint equals exactly one half of a US quart (0.473176473 liters) in the United States and 0.568261 liters in the United Kingdom (the imperial pint, 20% larger than the US pint). The British pint is iconic in pub culture — beer and cider are served in imperial pints in UK pubs, and the imperial pint glass is a regulated measure required by law. In the United States, milk is commonly sold by the pint (often as half-quart cartons), and ice cream containers are often pints (16 fl oz US). The pint relates to the gallon (8 pt = 1 gal), the quart (2 pt = 1 qt), the cup (2 cups = 1 US pt), and the fluid ounce (16 fl oz = 1 US pt; 20 fl oz = 1 imperial pt). The discrepancy between US and UK pints reflects the older 1824 imperial reform that the United States did not adopt.

• UK draft beer (half-pint and pint glasses)
• British doorstep milk delivery
• US ice-cream and ale packaging

What is the Cubic Meter?

The cubic meter equals exactly 1,000 liters and is the SI unit of volume, used for water utilities, construction materials, shipping containers, gas volumes, and industrial-scale measurements. Domestic water bills typically show consumption in cubic meters (a typical household uses 5–15 m³ per month), and natural-gas billing also uses m³. Concrete is delivered by the cubic meter, and shipping containers have internal volumes of about 33 m³ (20-ft) or 67 m³ (40-ft). The cubic meter is the volume of a cube measuring 1 meter on each side. It relates to the liter (1 m³ = 1,000 L), the cubic centimeter (1 m³ = 1,000,000 cm³), the cubic foot (1 m³ ≈ 35.31 ft³), and the US gallon (1 m³ ≈ 264.17 gal). Truck-cargo capacity, swimming-pool size, and natural-gas reserves are all commonly expressed in cubic meters.

• Household water and gas consumption on utility bills
• Concrete ordering for construction projects
• Shipping container and freight capacity