Convert Mile per Hour to Inch per Minute (mph → in/min)

Converting miles per hour to inches per minute is straightforward: multiply by the conversion factor. Follow these three steps to do it by hand or in your head.

1. 1
   Take your value in miles per hour

   Start with the number of miles per hour (mph) you want to convert.
2. 2
   Multiply by 1,056.8322

   The conversion factor from mph to in/min is 1,056.8322. Multiply your value by this number.
3. 3
   Read the result in inches per minute

   The result is your value in inches per minute (in/min).

Multiply the value in miles per hour by 1,056.8322. For the reverse direction, multiply by 0.000946.

• ✓1 mph = 1.609 km/h = 0.447 m/s.
• ✓Quick convert: mph × 1.6 = km/h.
• ✓UK speeds posted in mph on road signs despite general metrication.

• ✗Reading a UK road sign "50" as km/h — it's mph (= 80 km/h).
• ✗Converting mph to km/h by multiplying by 1.5 instead of 1.609 — 7% error.
• ✗Assuming "mph" and "MPH" differ — capitalisation does not matter.

What is the Mile per Hour?

Miles per hour is the road-speed standard in the United States, the United Kingdom, and several Caribbean countries. American and British road signs, car speedometers, and weather reports use mph. Typical US speed limits are 25 mph (residential), 35–45 mph (urban arterials), 55–65 mph (rural highways), and 65–80 mph (interstates). The UK uses mph despite metric measurement elsewhere — a result of incomplete metrication. Mph derives from the mile (distance) and hour (time): 1 mph ≈ 1.609 km/h ≈ 0.447 m/s. World-class sprinters reach about 27 mph, professional baseball pitchers throw at 90–105 mph, and commercial airliners cruise at 550–600 mph. The unit relates to km/h (1 mph ≈ 1.609 km/h), m/s (1 mph ≈ 0.447 m/s), the knot (1 mph ≈ 0.869 kn), and ft/s (1 mph ≈ 1.467 fps).

• US and UK road speed limits
• US car speedometers
• US baseball pitch speeds

What is the Inch per Minute?

Inches per minute is the American standard feed-rate unit for CNC machining, 3D printing, milling machines, and precision manufacturing. Machinists program tool feed rates in IPM (inches per minute) — typical values range from 5 to 100 IPM depending on material and tool. American machine controllers (Fanuc, Haas, Mazak) default to inches per minute when set to imperial mode. 3D printer feed rates are also commonly specified in IPM in US-built machines. The unit relates to inches per second (60 ipm = 1 ips), mm per minute (1 ipm = 25.4 mm/min — the metric machinist equivalent), and feet per minute (12 ipm = 1 fpm). Manufacturing CAM (computer-aided manufacturing) software allows switching between IPM and metric mm/min depending on machine controller setup.

• CNC milling and turning feed rates
• 3D printer head movement
• Some US industrial flow specifications